新聞資訊

首頁>>新聞資訊 >

長臂挖掘機的挖斗加固所需要注意的地方

日期:2022-05-16   來源:http://www.sfgpdy.com/
長臂挖掘機出租是很多工程施工需要的,而對于長臂挖掘機的挖斗加固所需要注意的地方,小編就來為大家介紹一下。
The rental of long arm excavators is needed in many engineering construction. I'd like to introduce the points that need to be paid attention to in the reinforcement of the bucket of long arm excavators.
1.齒根處的加強保護
1. Strengthen the protection at the tooth root
長臂挖掘機齒根安裝板的加強非常有必要,如果在此處的加強不好,會導致磨損將劇烈,牙齒怎么也裝不上去了。對于此處的加固可以采取兩種方案,一種是貼加強筋,一種是包耐磨塊。需要注意的是,貼加強筋的做法簡便,經濟,但是焊接時要注意不能與齒根的焊縫產生疊焊,這樣會影響齒根焊接強度。
It is very necessary to strengthen the tooth root mounting plate of long arm excavator. If the reinforcement here is not good, it will cause severe wear and tear, and the teeth can't be installed. For the reinforcement here, two schemes can be adopted, one is to stick stiffeners and the other is to wrap wear-resistant blocks. It should be noted that the method of attaching stiffeners is simple and economical, but during welding, it should be noted that overlapping welding with the weld of the tooth root will not occur, which will affect the welding strength of the tooth root.
2.邊板及側邊加強
2. Side plate and side reinforcement
邊板的劇烈磨損會使挖斗的斗容減小,影響生產力。同時,邊刀也起到利于切入物料,保護邊板的效果,所以挖斗需安裝邊刀。長臂挖掘機由于側邊并不是高磨損區,故側邊的加強不用太堅固,以免影響挖斗的整體重量。
The severe wear of the side plate will reduce the bucket capacity of the bucket and affect the productivity. At the same time, the edge knife also has the effect of cutting in materials and protecting the edge plate, so the edge knife needs to be installed in the bucket. Since the side of the long arm excavator is not a high wear area, the reinforcement of the side need not be too strong to avoid affecting the overall weight of the bucket.
3.底板加強
3. Base plate reinforcement
底板加強是非常有必要的。底板的加強筋要選擇堅硬、耐磨的長型板材做原料,要保護挖斗的整體形狀,以免影響切入角度,影響產能。加強筋的焊接要順著原機筋板焊接的方向,在兩塊板上疊焊。
It is very necessary to strengthen the bottom plate. The stiffener of the bottom plate shall be hard and wear-resistant long plate as raw material, and the overall shape of the bucket shall be protected to avoid affecting the cutting angle and production capacity. The welding of stiffeners shall be overlapped on the two plates along the welding direction of the original stiffener plate.
4.挖斗內面的加強
4. Strengthening of inner surface of bucket
長臂挖掘機廠家的小編建議內面加強使用硬面堆焊,雖然價錢高,耗時長。但是它的耐磨性跟實效性是非常強的,或者也可以選擇貼部分加強筋,不宜過多。
The small editor of the long arm excavator manufacturer suggests to strengthen the use of hard surfacing on the inner surface, although the price is high and time-consuming. However, its wear resistance and effectiveness are very strong, or you can choose to stick some stiffeners, which should not be too much.
本文的精彩內容由加長臂挖掘機出租提供知識提供,本網站還有很多的精彩內容,更多的內容您可以點擊進入: http://www.sfgpdy.com我們有專門的客服為您解答問題
The wonderful content of this article is provided by the rental of lengthening arm excavator. There are many wonderful contents on this website. You can click to enter more contents: http://www.sfgpdy.com We have special customer service to answer your questions

【本站圖片均由網站所有方提供,部分圖片來源于網絡,如無意中侵犯了某媒體或個人的知識產權,請來信或來電告之,本網站將立即刪除?!?/p> 人妻少妇久久中文字幕一区二区,禁断の爱肉体乱爱,又大又硬的毛片,国产九九99九九

<蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>